Steel wire braided rubber hoses can be used in some high-temperature environments, and the inner rubber layer has high load-bearing capacity, which can protect the steel wire layer from corrosion. What should be noted when using hydraulic systems that can be used for fuel transportation, factory equipment, etc?

Be careful not to twist the hose during installation, otherwise it may damage the hose or loosen the joint. When the bending radius is too small, inclined joints are usually used to prevent the hose from twisting. During normal operation, the rotation of the valve seat should not be too violent, otherwise it may cause cracking. In order to better prevent the hose from being damaged and the flow rate from being restricted, the bending radius should be increased as much as possible.

When the quality of the hose is not a problem, if it is damaged, it is usually due to misoperation, one of which is the installation process. In addition, regular applications should also ensure quality.

How to correctly check the quality of high-pressure rubber hoses?

Customers need to have a certain level of control over the use of related products. Regardless of the manufacturing and application of any product, its quality is of utmost importance, not only related to the product's usage time, but also to the safety of the manufacturing process. Similarly, if the steel wire braided rubber hose is too tight or has too few layers of stacking, the hose will undergo significant deformation under pressure and is prone to rusting. Insufficient adhesion between adhesive and stainless steel wire layer can easily cause wall thickness cracking.

Improper selection of clamping amount and clamping rate during the installation of rubber hoses and joints, or unscientific selection of joint structure, materials, and specifications, can result in excessive or insufficient pressure on the rubber hoses and joints, causing initial damage to the joints.

In addition, the unscientific design scheme and poor production and processing quality of steel wire braided rubber hoses can also lead to damage to the inner rubber; If the joint material is selected improperly, it is easy to cause deformation throughout the entire crimping process, endangering the quality of the crimping and reducing its service life.