How to choose braided silicone hose时间：2021-09-15浏览次数：994
How to choose braided silicone hose correctly？ What aspects should be considered when choosing braided silicone hose? The above points are a normal way for purchasers to consider. I would like to give you a brief introduction if you choose braided silicone hose: when choosing braided silicone hose, you should choose the appropriate braided silicone hose, connector and braided silicone hose assembly according to the specific application site. The elements you want to consider are: the type of braided silicone hose, the working environment of braided silicone hose, the size of braided silicone hose, the length of braided silicone hose, the working pressure of the system Please refer to the product specification for the fluid of the system and the application environment and selection.
There are many kinds of joints of braided silicone hose, and different joints should be selected according to different types of braided silicone hose. Note: braided silicone tubes need to be peeled separatelyExternal glueWith no strippingExternal glueThe joints of the two types are also different. The groove of the connector sleeve that needs to be peeled off should not be too sharp, otherwise the reinforcing layer of the braided silicone hose will be damaged.
It is very important for the safety and normal work of the braided silicone hose assembly to correctly crimp the joint. There are many types of joints, so it is necessary to choose suitable joints, and the design of joint sleeves should be standardized and reasonable. Sharp grooves and non-standard sizes will break the steel wire reinforcing layer. When crimping the joint, the amount of crimping should be determined according to the inner diameter and outer diameter of the braided silicone hose.