Steel wire braided rubber hoseIt can be used to transport crude oil-based materials with certain pressure and temperature in hydraulic transmission systems in various fields, consisting of a heat-resistant inner rubber layer, an intermediate rubber layer, a steel wire layer, and an outer rubber layer. The inner adhesive layer has the function of bearing pressure and preventing the steel wire from being corroded. The outer adhesive layer can prevent damage to the steel wire and improve the effectiveness of the steel wire layer. Suitable for conveying crude oil with certain pressure (higher pressure) and temperature in hydraulic transmission systems of various industries.

Installation requirements for steel wire braided rubber hose

1. High pressure rubber hoses are used in shorter indoor spaces with smaller bending radii. To achieve practical results, it is necessary to use a 90 degree elbow or other connector to prevent excessive bending of the high-pressure hose.

2. During the overall installation process of the high-pressure hose, it cannot be twisted, otherwise it will damage the high-pressure hose or loosen the joint when subjected to working pressure.

3. When the high-pressure hose is subjected to force throughout the entire working process, its length will change and become longer under high-pressure operation. Generally, there is no need to add positioning devices in the bending area for installation, so that the rubber hose can move freely and not be fixed.

4. During installation, the hose should not be twisted, otherwise it is easy to damage the high-pressure hose or cause the buckle to loosen when subjected to working pressure.

5. When the high-pressure hose is working, it does not need to come into contact with other objects to prevent friction damage. In special natural environments, protective measures can be taken for hoses by using spring sleeves or protective shells.

Common problems with steel wire braided rubber hoses

1. The bending radius cannot be lower than the given bending radius to avoid damaging the hose frame or premature damage due to excessive stretching.

2. According to the application standards, select the correct type, specification, and model of rubber hose, and do not misuse or replace it.

3. When using hoses, the pressure should be balanced and adjusted to prevent sudden pressure expansion from damaging the pipe body.

4. When the address changes during work, it should be transported off the ground and not dragged to prevent the frame layer from being etched after being scratched by the external adhesive.

5. When transporting etching solution, the interior should be cleaned after use to avoid long-term corrosion of the pipe body by residues, or corresponding product series should be used.

The steel wire braided rubber hose is made of special styrene butadiene rubber, which has high acid and alkali resistance, high temperature resistance, and aging resistance. The tube body is tightly fused, soft to use, with minimal deformation under pressure, and has high pressure bearing and single pulse performance.