Steel wire braided rubber hose made of iron horse rubber products must use matching correct U-clamps, sealing rings, two-way, three-way, etc. It is strictly prohibited to use other substitutes for steel wire braided rubber hoses. When operating the control valve, it should be gentle to reduce the pressure impact on the steel wire braided rubber hose and avoid the steel wire braided rubber hose from bursting. During daily use, attention should be paid to maintaining the steel wire braided rubber hose to avoid squeezing and colliding it. When installing the steel wire braided rubber hose, it should be prevented from being in a tight state, with a certain length allowance, and the steel wire braided rubber hose should be kept loose.

High oil resistance and medium corrosion resistance, improving the dynamic performance of rubber in the middle rubber layer, accepting more pressure pulses, and enhancing the rubber layer and reinforcement layer (THERMXN990 carbon black made of steel wire, etc. is used for the rubber layer inside high-pressure rubber hoses. Its high filling characteristics can reduce the material and its waste products, and it has characteristics such as low compression deformation, high elasticity, and low hysteresis resistance. The excellent oil, heat, and chemical resistance of rubber products also endow them with excellent dynamic performance. The large particles of THERMAX carbon black.

Mechanized automation hydraulic system. Liquid transmission pipelines are used for mining hydraulic supports, oilfield development engineering, construction, lifting transportation, metallurgy, forging, mining equipment, ship injection molding machinery, agricultural high-pressure pipelines are used for transporting water-based liquids (emulsions) with certain pressure and temperature, such as petroleum base (mineral oil soluble oil, hydraulic oil fuel, smooth oil, etc.).

The reason for a large amount of oil leakage in the hose but no rupture was found is that the internal rubber of the hose was eroded and scratched by high-pressure liquid flow, and the surface of the hose that did not rupture but had a large amount of oil leakage showed bubbles. The reason is that the quality of the hose is not up to standard or it was not used properly during operation. The main reason for the bubbles on the surface of the hose and the cracks on the surface of the hose is that the hose is bent in a cold environment. The surface of the hose shows cracks on the outer rubber layer of the high-pressure hose.

Guigang smooth steel wire braided rubber hose for complete sealing. Sealing method for hydraulic hose joints and hose connections - As for hydraulic joints, no other rubber rings are required for sealing, and one end of the product itself is concave, while the other end has internal teeth, so it should be able to be directly connected.

In the oil pipeline, there will be repeated sudden increases or decreases in oil pressure, which will cause frequent pressure shocks to the oil pipeline, leading to increased damage to local oil seals and frequent and violent pressure shocks to high pressure. High pressure hose rupture is usually not caused by excessive static pressure, but is related to the level and frequency of pressure impact. Work is formed due to improper use.