With the changes in productivity brought about by science and technology, the global industrial production pattern is still undergoing significant changes.Steel wire braided rubber hoseIt is a commonly used product in the field of machinery, widely used in equipment such as loaders, excavators, rollers, forklifts, hydraulic cranes, etc. Due to the increasing demand in agriculture and industry, there is a huge demand for rubber hose products that can adapt to the environment and meet industrial production needs.

In order to understand the product performance of rubber hoses, manufacturers and quality inspection units need to set up corresponding pressure and temperature control environments, so that the tested parts can reach the actual working state for fatigue life testing to determine product performance.

In addition to ensuring product quality, safety, and reliability, selecting appropriate hose products based on usage requirements is also an important factor in ensuring the safety and rationality of the entire system. When choosing steel wire braided rubber hoses, the following points should be noted:

1. Select the number of steel wire layers for the rubber hose based on the system pressure. The higher the pressure, the more steel wire layers there will be. Therefore, based on the actual system pressure, the working pressure of the selected hose may be slightly higher than the actual working pressure.

2. Choose the inner diameter of the hose based on the flow rate. If the diameter is too small, it will increase the flow rate of the medium in the pipeline, causing the system to heat up, reduce efficiency, generate excessive pressure drop, and affect the performance of the entire system. If the pipe diameter is too large, the cost will increase, so the inner diameter needs to be appropriate.

4. When selecting, attention should be paid to the bending radius of the hose, and the length of the rolled edge of the front joint should be subtracted when calculating the bending radius. If the bending radius of the installed hose is too small, it will reduce the pressure bearing capacity and affect the service life.

The additional layer of the steel wire braided rubber hose is a specially treated high winding steel wire layer, with an inner adhesive layer of polyoxymethylene (POM) or polyamide (PA) and an outer adhesive layer of polyamide (PA) or polyurethane (PUR). Low fluid resistance, small volume expansion, good rust prevention performance, light weight, small outer diameter, and a single length of up to 1200m.