The steel wire braided rubber hose can withstand high pressure. According to the system pressure, the greater the required pressure, the more layers of steel wire, and the stricter the production of the product. If the system experiences frequent impact pressure, a hose with a longer pulse life should be selected. At the same time, it is necessary to improve the understanding of the classification of rubber hose specifications and models appropriately. After selecting the hose, attention should also be paid to its connection and usage.

1. Usage requirements

(1) Before use, the model and length should be checked to ensure compliance with the specified requirements, and a sampling pressure test should be conducted. Only after passing the test can it be used.

(2) Check if there are exposed steel wires at the joints and hose connections, and if there is any separation in the outer rubber layer. If the above phenomenon occurs, do not use.

(3) The coating on the joint end must not be damaged or peeled off. If peeling occurs, do not use it to avoid leakage due to loose sealing.

(4) The inner wall of the newly installed rubber hose should be cleaned to prevent rubber powder and debris from entering the hydraulic system.

2. Connection requirements

(1) When connecting, the steel wire braided rubber hose should be prevented from twisting to avoid changing the angle of the skeleton layer and causing early damage.

(2) The length of the connected rubber hose should have a corresponding margin to prevent length changes due to tension and reduce pressure bearing capacity.

(3) The fixed clamp should be placed on the straight line where the curve intersects with the straight line, and the clamp should not deform or loosen the hose too much.

(4) When connecting moving parts, sufficient length should be left to avoid pulling during movement.

(5) The bending radius of the connection should comply with relevant regulations.

The use of steel wire braided rubber hoses is increasing, and in order to meet various requirements, they can be processed and customized. According to actual usage requirements, such as the temperature, concentration, working pressure, and operating environment of the conveying medium, correctly select the type, specification, and model of the rubber hose.