Steel wire braided rubber hoses are widely used in various places and have been loved by a large number of users. The characteristic is excellent oil resistance to gasoline and fatty hydrocarbon oils, second only to polysulfide rubber, acrylic ester, and fluororubber. Good heat resistance, airtightness, wear resistance, water resistance, and strong adhesion. Mainly used for making various oil resistant products, such as rubber hoses, sealing products, etc.

Steel wire braided rubber hoses are fire-resistant and flame resistant, mainly used in harsh environments such as steel mills with high working temperatures. So what are the requirements during processing? Next, we will briefly introduce its related knowledge points to everyone. Pay attention to the working pressure of the environment during processing, select the corresponding rubber hose, and determine the length of the rubber hose assembly. The length should be moderate, neither too short nor too long. After determining the length, armor the rubber hose. If the external environment is high, asbestos should be added to achieve flame retardancy. Usually, a layer of asbestos can be added; If the external temperature is too high, two layers of asbestos should be added; If the external temperature is too high, a layer of silicone fireproof sheath should be added outside the rubber hose.

Sometimes, the outer rubber layer of high-pressure hoses can deteriorate severely. This phenomenon is usually caused by the aging of high-pressure hoses and belongs to natural aging and deterioration. This is because the outer layer of rubber is exposed to oxygen for a long time, and as time goes on, its surface is covered by oxidized ozone. In this case, if the high-pressure rubber layer bends slightly, cracks will appear. In this case, we should replace the hose. Bubbles appearing on the surface of high-pressure hoses are usually due to improper use or poor quality of the hose. In cold environments, high-pressure hoses are prone to hardening and becoming brittle, and are also very prone to bending, causing cracks to appear when reacting with the surface.

Steel wire braided rubber hoses are mainly used for the transportation of liquids and gases, with stricter requirements than ordinary high-pressure rubber hoses. Based on the usage characteristics of high-pressure hoses, determine the higher working pressure of the high-pressure hose according to the system pressure. Each type of high-pressure hose has a normal working pressure, and the burst pressure of high-pressure hoses is 3-4 times that of larger working pressures. The higher the pressure, the higher the number of steel wire layers, and the stricter the product production. Therefore, based on the actual pressure of the system, a higher working pressure of the high-pressure hose can be selected to ensure the normal operation of the system, and the correct use of the high-pressure hose can be chosen. If the system experiences frequent impact pressure, high-pressure hoses with high pulse life should be selected, and the understanding of the classification of high-pressure hose specifications and models should be appropriately improved. Temperature is also one of the factors that customers consider, as high or low temperatures in the working environment can affect the lifespan and pressure bearing capacity of steel wire braided rubber hoses. Therefore, high-pressure hoses should be used within their allowable range. For systems with operating temperatures that are not within their allowable range for a long time, specialized high-pressure hoses should be purchased.